 |
 |
 |
 |
CHALK EATER UNITS, FILTERS, CLEANING SUPPLIES
|
|
 |
 |
 |
|
CHALK EATER
$1,595.00
PRICE DOES NOT INCLUDE SHIPPING
CALL FOR SHIPPING COST
|
|
|
|
CLEAN UP THE QUALITY OF AIR IN YOUR GYM!
The Chalk Eater Unit is the only air filtration unit available that removes airborne chalk dust, pollen, and pollutants in the vicinity of the Chalk Eater Unit.
We have Chalk Eater Units in-stock, shipping same day as ordered. Our new unit is made with a hard plastic housing, available in BLUE or RED, with a built-in floor stand.
CUSTOM COLORS AVAILABLE WITH AN ADDITIONAL CHARGE OF $100.00 PER-UNIT. Call for color availability.
Each Chalk Eater Unit includes:
| |
- CHALK EATER UNIT WITH BUILT-IN STAND
- 3 SETS OF FILTERS (2 LARGE, 1 SMALL FILTER PER-SET)
- 1 GALLON OF TAC SPRAY
- 1 GALLON FILTER CLEANER
- 2 SPRAY BOTTLES
- 1 YEAR WARRANTY
|
|
|
 |
 |
 |
|
|
|
BENEFITS
- Healthier environment for Coaches and Athletes
- Extends the life of heating and air conditioning filters
- Helps heating and air conditioning units operate more efficiently, which reduces utility bills
- Circulates the air in the gym
- Reduces cleaning time and cleaning expenses
GENERAL INFORMATION
- A single Chalk Eater Unit will filter 6,000 cubic feet of air per-minute
- One unit will take care of 5,000 square feet of gym with up to 4 bar stations
- To obtain the maximum benefit, the unit should be ran 24 hours a day, 365 days a year, or you can run a time to be used to turn the unit on one hour prior to classes and turn off one hour after classes has ran. The more the unit is run, the cleaner the air will be
- The unit is pre-wired for 110 volts with a “ON / OFF” switch and a 8’ #12 electrical wire cord
- The dimensions of the Chalk Eater Unit are: 21”W X 36”L X 29”H
|
|
|
CHALK EATER UNIT
MAINTENANCE AND REPLACEMENT PARTS
|
|
|
REPLACEMENT FILTERS WILL WORK FOR OUR PREVIOUS MODEL CHALK EATER AND OUR NEW MODEL CHALK EATER
|
|
1 FILTER SET (2 LARGE, 1 SMALL)
|
$15.00 per set
|
|
6 OR MORE FILTER SETS
|
$12.00 per set
|
|
FILTER SPRAY (1 CAN)
|
$12.95 ea
|
|
1 CASE OF FILTER SPRAY (12 CANS)
|
$155.40 per case
|
|
FILTER CLEAN (1 GALLON)
|
$16.25 ea
|
|
FILTER CLEAN (1 CASE – 4 GALLONS PER CASE)
|
$65.00 per case
|
|
UNIT REPAIR PARTS
FOR PRICING AND AVAILABILITY PLEASE CALL 800-876-3194 OR YOUR LOCAL DEALER
|
|
|
|
|
|
|
|
|
 |
|
|
FILTER MAINTENANCE
The fiber media, (pre-filters), and the secondary aluminum mesh filters should be cleaned weekly. The better the filters are maintained, the better the chalk eater unit will operate.
|
1.
|
The power must be turned off when cleaning the filters.
|
|
2.
|
Clean the secondary aluminum mesh filters first and air dry while the fiber media, (pre-filters), are being vacuumed.
|
|
3.
|
Spray secondary aluminum mesh filters with the filter clean provided. Any household cleaner, (409), or oil emulsifier can be used. Do not use ammonia, bleach, or any cleaners that contain acid. Spray both sides of the secondary aluminum mesh filters and rinse with cold water. Shake out excess water and air dry. The pressure outlet of a shop vacuum can be used to speed up the drying process.
|
|
4.
|
Once the secondary aluminum mesh filters are dry, spray both sides with filter tack spray.
|
|
5.
|
Re-install the secondary aluminum mesh filter. NOTE: Air direction flow arrow must be facing the inside of the chalk eater unit.
|
|
6.
|
Vacuum the fiber media, (pre-filters), to remove chalk, dust, and airborne pollutants.
|
|
7.
|
Install fiber media, (pre-filters), and turn on unit.
|
Maintaining the filters is important in keeping the chalk eater unit operating at peak efficiency. Dirty filters restrict the air filtration and reduce the effectiveness of the chalk eater unit.
|
|
|
|
|
|
|
|
|
|
|
CHALK EATER UNIT SAFETY INFORMATION
|
1.
|
Follow all local electrical codes, the National Electric codes and Occupational Safety and Health codes, (OSHA). Have all electrical work performed by a qualified electrician.
|
|
2.
|
Turn unit off prior to cleaning or changing filters. Never turn the unit on without the metal filters in place.
|
|
3.
|
Disconnect power when working on unit. Be especially cautious of pulleys and belts. Allow the electric motor to cool before touching to prevent burns. Keep clear of belts and pulleys.
|
|
4.
|
Do not allow cord to come in contact with sharp objects.
|
|
5.
|
Make sure the power source conforms to the local and National Electrical codes. Use only a heavy duty #12 wire extension cord. Do not use an extension cord over 20’ in length. Have a qualified electrician check for voltage drop prior to turning on the unit. Do not operate the unit with undersize or damaged electrical cord.
|
|
6.
|
Keep the discharge (outlet) vent open, clean, and clear of any obstructions.
|
|
|
 go to top
|
|
 |
Midwest Gym Supply, Inc.
Eagle Equipment
775 Scott Court
Madison, IN 47250
1-800-876-3194
1-812-273-4875 FAX
|
|
|
|
|
Copyright © 2010 Midwest Gym Supply, Inc Supplying Gymnastics Equipment for Gymnasts and Cheerleaders across the U.S.A.
|
|
|
Contact Webmaster to report site issues: 
|
|
|
